Scouting/BSA/Farm Mechanics Merit Badge
|The requirements to this merit badge are copyrighted by the Boy Scouts of America. They are reproduced in part here under fair use as a resource for Scouts and Scouters to use in the earning and teaching of merit badges. The requirements published by the Boy Scouts of America should always be used over the list here. If in doubt about the accuracy of a requirement, consult your Merit Badge Counselor.|
|Reading this page does not satisfy any requirement for any merit badge. Per National regulations, the only person who may sign off on requirements is a Merit Badge Counselor, duly registered and authorized by the local Council. To obtain a list of registered Merit Badge Counselors, or to begin a Merit Badge, please contact your Scoutmaster or Council Service Center.|
Requirement 1[edit | edit source]
Do the following:
- A. Discuss with your counselor the safety equipment, tools, and clothing used while checking or repairing farm equipment. Use this equipment, tools, and/or clothing (when needed or called for) in meeting the requirements for this merit badge.
- B. Draw a plan showing a well-equipped farm shop. Point out the shop's mandatory safety devices and features.
- C. Find all the universal warning and safety symbols on a piece of equipment and explain what they mean.
- D. Describe what a material safety data sheet (MSDS) is and tell why it is used. Obtain the MSDS for any engine coolant, oil, grease, fuel, hydraulic or transmission fluid, or other flammable or hazardous materials you use in meeting the requirements for this merit badge.
Requirement 2[edit | edit source]
Explain how power is produced or transferred in a:
- C. Transmission or any other power system.
Requirement 3[edit | edit source]
Do TWO of the following:
- A. Replace the handle on any tool found on the farm.
- B. Organize a tool rack or a storage system for nails, bolts, nuts, and washers.
- C. Using a hand file, properly dress the mushroom head of a chisel or punch.
- D. Correctly grind or file a screwdriver tip.
Requirement 4[edit | edit source]
Do ONE of the following:
- A. On an engine-powered machine: grease all fittings, change the oil and oil filter, clean the air filter, clean the radiator fins, and replace the fuel filters.
- B. For any engine-powered machine, create a pre-operational checklist; include checking the engine coolant, engine oil, hydraulic and/or transmission fluid, and battery voltage (using a voltmeter). Using your checklist, conduct a pre-operational check of that machinery or equipment.
- C. Prepare any farm machine for winter storage.
Requirement 5[edit | edit source]
Visit an implement dealer. Interview the dealer, technician, or service manager for hints on good preventive maintenance. Ask why it is important, the costs, and what causes wear or damage. Report what you learn.
Requirement 6[edit | edit source]
Explain each step in ONE of the following maintenance procedures:
- A. Tightening hydraulic fittings
- B. Checking the air filter
- C. Cleaning a work piece with a wire-brush wheel.
Requirement 7[edit | edit source]
Find out about three career opportunities in farm mechanics. Pick one and find out about the education, training, and experience required for this profession. Discuss this with your counselor, and explain why this profession might interest you.
[edit | edit source]
- Farm Mechanics Merit Badge with Workbook PDF, current requirements, and resources.
|Earning Merit Badges in the Boy Scouts of America|
|Professions and Trades|
|Animal Science | Architecture | Automotive Maintenance | Dentistry | Drafting | Electronics | Engineering | Farm Mechanics | Game Design | Graphic Arts | Home Repairs | Journalism | Landscape Architecture | Law | Medicine | Metalwork | Plumbing | Programming | Public Health | Pulp and Paper | Salesmanship | Surveying | Textile | Truck Transportation | Veterinary Medicine | Woodwork|