Cg Programming/Unity/Order-Independent Transparency

This tutorial covers order-independent blending.

It continues the discussion in Section “Transparency” and solves some problems of standard transparency. If you haven't read that tutorial, you should read it first.

Order-Independent Blending

As noted in Section “Transparency”, the result of blending often (in particular for standard alpha blending) depends on the order in which triangles are rendered and therefore results in rendering artifacts if the triangles are not sorted from back to front (which they usually aren't). The term “order-independent transparency” describes various techniques to avoid this problem. One of these techniques is order-independent blending, i.e. the use of a blend equation that does not depend on the order in which triangles are rasterized. There are two basic possibilities: additive blending and multiplicative blending.

Additive Blending

The standard example for additive blending are double exposures as in the images in this section: colors are added such that it is impossible (or at least very hard) to say in which order the photos were taken. Additive blending can be characterized in terms of the blend equation introduced in Section “Transparency”:

float4 result = SrcFactor * fragment_output + DstFactor * pixel_color;

where fragment_output is the output of the fragment shader, and pixel_color is the color that is already in the framebuffer while SrcFactor and DstFactor are determined by a line in Unity's ShaderLab syntax:

Blend {code for SrcFactor} {code for DstFactor}

For additive blending, the code for DstFactor has to be One and the code for SrcFactor must not depend on the pixel color in the framebuffer; i.e., it can be One, SrcColor, SrcAlpha, OneMinusSrcColor, or OneMinusSrcAlpha.

An example is:

Shader "Cg shader using additive blending" {
   SubShader {
      Tags { "Queue" = "Transparent" } 
         // draw after all opaque geometry has been drawn
      Pass { 
         Cull Off // draw front and back faces
         ZWrite Off // don't write to depth buffer 
            // in order not to occlude other objects
         Blend SrcAlpha One // additive blending

         CGPROGRAM 
 
         #pragma vertex vert 
         #pragma fragment frag
 
         float4 vert(float4 vertexPos : POSITION) : SV_POSITION 
         {
            return UnityObjectToClipPos(vertexPos);
         }
 
         float4 frag(void) : COLOR 
         {
            return float4(1.0, 0.0, 0.0, 0.2); 
         }
 
         ENDCG  
      }
   }
}

Multiplicative Blending

An example for multiplicative blending in photography is the use of multiple uniform grey filters: the order in which the filters are put onto a camera doesn't matter for the resulting attenuation of the image. In terms of the rasterization of triangles, the image corresponds to the contents of the framebuffer before the triangles are rasterized, while the filters correspond to the triangles.

When specifying multiplicative blending in Unity with the line

Blend {code for SrcFactor} {code for DstFactor}

the code for SrcFactor has to be Zero and the code for DstFactor must depend on the fragment color; i.e., it can be SrcColor, SrcAlpha, OneMinusSrcColor, or OneMinusSrcAlpha. A typical example for attenuating the background with the opacity specified by the alpha component of fragments would use OneMinusSrcAlpha for the code for DstFactor:

Shader "Cg shader using multiplicative blending" {
   SubShader {
      Tags { "Queue" = "Transparent" } 
         // draw after all opaque geometry has been drawn
      Pass { 
         Cull Off // draw front and back faces
         ZWrite Off // don't write to depth buffer 
            // in order not to occlude other objects
         Blend Zero OneMinusSrcAlpha // multiplicative blending 
            // for attenuation by the fragment's alpha

         CGPROGRAM 
 
         #pragma vertex vert 
         #pragma fragment frag
 
         float4 vert(float4 vertexPos : POSITION) : SV_POSITION 
         {
            return UnityObjectToClipPos(vertexPos);
         }
 
         float4 frag(void) : COLOR 
         {
            return float4(1.0, 0.0, 0.0, 0.2); 
         }
 
         ENDCG  
      }
   }
}

Complete Shader Code

Finally, it makes good sense to combine multiplicative blending for the attenuation of the background and additive blending for the addition of colors of the triangles in one shader by combining the two passes that were presented above. This can be considered an approximation to alpha blending for small opacities, i.e. small values of alpha, if one ignores attenuation of colors of the triangle mesh by itself.

Shader "Cg shader using order-independent blending" {
   SubShader {
      Tags { "Queue" = "Transparent" } 
         // draw after all opaque geometry has been drawn
      Pass { 
         Cull Off // draw front and back faces
         ZWrite Off // don't write to depth buffer 
            // in order not to occlude other objects
         Blend Zero OneMinusSrcAlpha // multiplicative blending 
            // for attenuation by the fragment's alpha

         CGPROGRAM 
 
         #pragma vertex vert 
         #pragma fragment frag
 
         float4 vert(float4 vertexPos : POSITION) : SV_POSITION 
         {
            return UnityObjectToClipPos(vertexPos);
         }
 
         float4 frag(void) : COLOR 
         {
            return float4(1.0, 0.0, 0.0, 0.2); 
         }
 
         ENDCG  
      }

      Pass { 
         Cull Off // draw front and back faces
         ZWrite Off // don't write to depth buffer 
            // in order not to occlude other objects
         Blend SrcAlpha One // additive blending to add colors

         CGPROGRAM 
 
         #pragma vertex vert 
         #pragma fragment frag
 
         float4 vert(float4 vertexPos : POSITION) : SV_POSITION 
         {
            return UnityObjectToClipPos(vertexPos);
         }
 
         float4 frag(void) : COLOR 
         {
            return float4(1.0, 0.0, 0.0, 0.2); 
         }
 
         ENDCG  
      }
   }
}

Note that the order of the two passes is important: first the background is attenuated and then colors are added.

Summary

Congratulations, you have reached the end of this tutorial. We have looked at:

What order-independent transparency and order-independent blending is.
What the two most important kinds of order-independent blending are (additive and multiplicative).
How to implement additive and multiplicative blending.
How to combine two passes for additive and multiplicative blending for an order-independent approximation to alpha blending.

Order-Independent Blending

Additive Blending

Multiplicative Blending

Complete Shader Code

Summary

Further reading