Reaktor/Tutorials/Hold switch

From Wikibooks, open books for an open world
< Reaktor‎ | Tutorials
Jump to navigation Jump to search

How to insert a Hold Switch into a synth[edit | edit source]

Sometimes, it is useful to hold a note or chord indefinitely without continuously holding down keys or pushing the sustain pedal. You can achieve that with a hold switch that can be implemented as follows:

1. insert a button at the instrument level (toggle type, range 0-1)

2. assign it to MIDI controller 66 (no connections are necessary)


Notes

- make sure that the instrument properties allow for a hold control, and that it is assigned to cc #66

- check if the button's MIDI in is activated

- don't copy + paste the button from another instrument, it won't work!!