Non-Programmer's Tutorial for Python 2.6/Who Goes There?
Input and Variables
Now I feel it is time for a really complicated program. Here it is:
print "Halt!" user_reply = raw_input("Who goes there? ") print "You may pass,", user_reply
When I ran it, here is what my screen showed:
Halt! Who goes there? Josh You may pass, Josh
Note: After running the code by pressing F5, the Python shell will only give output:
Halt! Who goes there?
You need to enter your name in the Python shell, and then press Enter to get the rest of the output.
Of course when you run the program your screen will look different
because of the
raw_input() statement. When you ran the program
you probably noticed (you did run the program, right?) that you had to
type in your name and then press Enter. Then the program printed out
some more text and also your name. This is an example of input. The
program reaches a certain point and then waits for the user to input
some data that the program can use later.
Of course, getting information from the user would be useless if we didn't have anywhere to put that information and this is where variables come in. In the previous program,
user_reply is a variable. Variables are like a box that can store some piece of data. Here is a program to show examples of variables:
a = 123.4 b23 = 'Spam' first_name = "Bill" b = 432 c = a + b print "a + b is", c print "first_name is", first_name print "Sorted Parts, After Midnight or", b23
And here is the output:
a + b is 555.4 first_name is Bill Sorted Parts, After Midnight or Spam
The variables in the above program are
c. A variable in Python can store any type of data - in this example we stored some strings (e.g. "Bill") and some numbers (e.g. 432).
Note the difference between strings and variable names. Strings are marked with quotation marks, which tells the computer "don't try to understand, just take this text as it is":
This would print the text:
as-is. Variable names are written without any quotation marks and instruct the computer "use the value I've previously stored under this name":
which would print (after the previous example):
Okay, so we have these boxes called variables and also data that can go into the variable. The computer will see a line like
first_name = "Bill" and it reads it as "Put the string
Bill into the box (or variable)
first_name". Later on it sees the statement
c = a + b and it reads it as "put the sum of
a + b or
123.4 + 432 which equals
c". The right hand side of the statement (
a + b) is evaluated and the result is stored in the variable on the left hand side (
c). This is called assignment, and you should not confuse the assignment equal sign (
=) with "equality" in a mathematical sense here (that's what
== will be used for later).
Here is another example of variable usage:
a = 1 print a a = a + 1 print a a = a * 2 print a
And of course here is the output:
1 2 4
Even if it is the same variable on both sides the computer still reads it as "First find out the data to store and then find out where the data goes".
One more program before I end this chapter:
number = input("Type in a number: ") text = raw_input("Type in a string: ") print "number =", number print "number is a", type(number) print "number * 2 =", number * 2 print "text =", text print "text is a", type(text) print "text * 2 =", text * 2
The output I got was:
Type in a Number: 12.34 Type in a String: Hello number = 12.34 number is a <type 'float'> number * 2 = 24.68 text = Hello text is a <type 'str'> text * 2 = HelloHello
number was gotten with
text was gotten with
raw_input() returns a string while
input() returns a number. When you want the user to type in a number use
input() but if you want the user to type in a string use
| Only use
Everything entered into
The second half of the program uses
type() which tells what a
variable is. Numbers are of type
float, which are
short for integer and floating point (mostly used for decimal numbers), respectively. Text strings are of type
str, short for string. Integers and floats can be worked on by mathematical functions, strings cannot. Notice how when python
multiplies a number by an integer the expected thing happens. However
when a string is multiplied by an integer the result is that multiple
copies of the string are produced (i.e.,
text * 2 = HelloHello).
The operations with strings do different things than operations with numbers. Here are some interactive mode examples to show that some more.
>>> "This" + " " + "is" + " joined." 'This is joined.' >>> "Ha, " * 5 'Ha, Ha, Ha, Ha, Ha, ' >>> "Ha, " * 5 + "ha!" 'Ha, Ha, Ha, Ha, Ha, ha!' >>>
This could also be done as a program:
print "This" + " " + "is" + " joined." print "Ha, " * 5 print "Ha, " * 5 + "ha!"
Here is the list of some string operations:
# This program calculates rate and distance problems print "Input a rate and a distance" rate = input("Rate: ") distance = input("Distance: ") print "Time:", (distance / rate)
Input a rate and a distance Rate: 5 Distance: 10 Time: 2
Input a rate and a distance Rate: 3.52 Distance: 45.6 Time: 12.9545454545
# This program calculates the perimeter and area of a rectangle print "Calculate information about a rectangle" length = input("Length: ") width = input("Width: ") print "Area", length * width print "Perimeter", 2 * length + 2 * width
Calculate information about a rectangle Length: 4 Width: 3 Area 12 Perimeter 14
Calculate information about a rectangle Length: 2.53 Width: 5.2 Area 13.156 Perimeter 15.46
# Converts Fahrenheit to Celsius temp = input("Fahrenheit temperature: ") print (temp - 32.0) * 5.0 / 9.0
Fahrenheit temperature: 32 0.0
Fahrenheit temperature: -40 -40.0
Fahrenheit temperature: 212 100.0
Fahrenheit temperature: 98.6 37.0
- Write a program that gets 2 string variables and 2 integer variables from the user, concatenates (joins them together with no spaces) and displays the strings, then multiplies the two numbers on a new line.
Write a program that gets 2 string variables and 2 integer variables from the user, concatenates (joins them together with no spaces) and displays the strings, then multiplies the two numbers on a new line.
string1 = raw_input('String 1: ') string2 = raw_input('String 2: ') int1 = input('Integer 1: ') int2 = input('Integer 2: ') print string1 + string2 print int1 * int2
print "this is an exercise" number_1 = input("please input the first number: ") number_2 = input("Please input the second number: ") string_1 = raw_input("Please input the first half of the word: ") string_2 = raw_input("please input the second half of the word: ") print "the words you input is '" + string_1 + string_2 + "'" print "the result of the 2 numbers is:", number_1 * number_2