# Learning Python 3 with the Linkbot/Count to 10

Lesson Information

**To Be Added**
Vocabulary:
Necessary Materials and Resources:
Computer Science Teachers Association Standards: 5.2.CPP.5: Implement problem solutions using a programming
language, including: looping behavior, conditional statements, logic,expressions, variables, and functions.
Common Core Math Content Standards:
Common Core Math Practice Standards:
Common Core English Language Arts Standards:


## Contents

### While loops

Ordinarily the computer starts with the first line and then goes down from there. Control structures change the order that statements are executed or decide if a certain statement will be run. Here's the source for a program that uses the while control structure:

a = 0 # FIRST, set the initial value of the variable a to 0(zero).
while a < 10: # While the value of the variable a is less than 10 do the following:
a = a + 1    # Increase the value of the variable a by 1, as in: a = a + 1!
print(a)     # Print to screen what the present value of the variable a is.
# REPEAT! until the value of the variable a is equal to 9!? See note.

# NOTE:
# The value of the variable a will increase by 1
# with each repeat, or loop of the 'while statement BLOCK'.
# e.g. a = 1 then a = 2 then a = 3 etc. until a = 9 then...
# the code will finish adding 1 to a (now a = 10), printing the
# result, and then exiting the 'while statement BLOCK'.
#              --
# While a < 10: |
#     a = a + 1 |<--[ The while statement BLOCK ]
#     print (a) |
#              --


And here is the extremely exciting output:

1
2
3
4
5
6
7
8
9
10


(And you thought it couldn't get any worse after turning your computer into a five-dollar calculator?)

So what does the program do? First it sees the line a = 0 and sets a to zero. Then it sees while a < 10: and so the computer checks to see if a < 10. The first time the computer sees this statement, a is zero, so it is less than 10. In other words, as long as a is less than ten, the computer will run the tabbed in statements. This eventually makes a equal to ten (by adding one to a again and again) and the while a < 10 is not true any longer. Reaching that point, the program will stop running the indented lines.

Always remember to put a colon ":" at the end of the while statement line!

Here is another example of the use of while:

a = 1
s = 0
print('Enter Numbers to add to the sum.')
print('Enter 0 to quit.')
while a != 0:
print('Current Sum:', s)
a = float(input('Number? '))
s = s + a
print('Total Sum =', s)

Enter Numbers to add to the sum.
Enter 0 to quit.
Current Sum: 0
Number? 200
Current Sum: 200.0
Number? -15.25
Current Sum: 184.75
Number? -151.85
Current Sum: 32.9
Number? 10.00
Current Sum: 42.9
Number? 0
Total Sum = 42.9


Notice how print 'Total Sum =', s is only run at the end. The while statement only affects the lines that are indented with whitespace. The != means does not equal so while a != 0: means as long as a is not zero run the tabbed statements that follow.

Note that a is a floating point number, and not all floating point numbers can be accurately represented, so using != on them can sometimes not work. Try typing in 1.1 in interactive mode.

#### Infinite loops or Never Ending Loop

Now that we have while loops, it is possible to have programs that run forever. An easy way to do this is to write a program like this:

while 1 == 1:
print("Help, I'm stuck in a loop.")


The "==" operator is used to test equality of the expressions on the two sides of the operator, just as "<" was used for "less than" before (you will get a complete list of all comparison operators in the next chapter).

This program will output Help, I'm stuck in a loop. until the heat death of the universe or you stop it, because 1 will forever be equal to 1. The way to stop it is to hit the Control (or Ctrl) button and C (the letter) at the same time. This will kill the program. (Note: sometimes you will have to hit enter after the Control-C.) On some systems, nothing will stop it, short of killing the process--so avoid!

### Examples

#### Fibonacci sequence

Fibonacci-method1.py

# This program calculates the Fibonacci sequence
a = 0
b = 1
count = 0
max_count = 20

while count < max_count:
count = count + 1
print(a, end=" ")  # Notice the magic end=" " in the print function arguments
# that keeps it from creating a new line.
old_a = a    # we need to keep track of a since we change it.
a = b
b = old_a + b
print() # gets a new (empty) line.


Output:

0 1 1 2 3 5 8 13 21 34 55 89 144 233 377 610 987 1597 2584 4181


Note that the output is on a single line because of the extra argument end=" " in the print arguments.

Fibonacci-method2.py

# Simplified and faster method to calculate the Fibonacci sequence
a = 0
b = 1
count = 0
max_count = 10

while count < max_count:
count = count + 1
print(a, b, end=" ")  # Notice the magic end=" "
a = a + b
b = a + b
print() # gets a new (empty) line.


Output:

0 1 1 2 3 5 8 13 21 34 55 89 144 233 377 610 987 1597 2584 4181


# Waits until a password has been entered. Use Control-C to break out without

#Note that this must not be the password so that the
# while loop runs at least once.

# note that != means not equal
print("Welcome in")


Sample run:

Password: auo
Welcome in


The Linkbot has a small buzzer on board that can play one note at a time. We can control the frequency of the buzzer on the Linkbot to generate different tones. The equation ${\displaystyle \mathrm {pianokeyFrequency} =2^{((\mathrm {key} -49)/12)}*440}$ shows how to calculate the frequency of a key on a piano. There are 88 keys on a real piano, but lets see if we can make our robot play from the 34th key all the way up to the 73rd key.

In Python, to calculate the "power" of a number, we can use the ** operator. For instance, ${\displaystyle 2^{3}}$ can be calculated in Python using 2**3.

import barobo
dongle = barobo.Dongle()
dongle.connect()
robotID = input('Enter Linkbot ID: ')
import time # imports the Python "time" module because we want to use "time.sleep()" later.
key=34 # Set key=34 which is the 34th key on a piano keyboard.
while key < 74: # While the key number is less than 74.
robot.setBuzzerFrequency(2**((key-49)/12.0)*440)  # Play the frequency to the corresponding note.
time.sleep(.25)   # Play the note for 0.25 seconds.
robot.setBuzzerFrequency(0)  # Turn off the note
key=key+1         # Increase the key number by 1. This is the end of the loop. At this point,
# Python will check to see if the condition in the "while" statement,
# "key < 74", is true. If it is still true, Python will go back to the
# beginning of the loop. If not, the program exits the loop.


### Exercises

Write a program that asks the user for a Login Name and password. Then when they type "lock", they need to type in their name and password to unlock the program.

Solution

Write a program that asks the user for a Login Name and password. Then when they type "lock", they need to type in their name and password to unlock the program.

name = input("What is your UserName: ")
print("To lock your computer type lock.")
command = None
input1 = None
input2 = None
while command != "lock":
command = input("What is your command: ")
while input1 != name:


If you would like the program to run continuously, just add a while 1 == 1: loop around the whole thing. You will have to indent the rest of the program when you add this at the top of the code, but don't worry, you don't have to do it manually for each line! Just highlight everything you want to indent and click on "Indent" under "Format" in the top bar of the python window.

Another way of doing this could be:

name = input('Set name: ')
while 1 == 1:
nameguess=""
key=""
nameguess = input('Name? ')
print("Welcome,", name, ". Type lock to lock.")
while key != "lock":
key = input("")


Notice the or in while (nameguess != name) or (passwordguess != password), which we haven't yet introduced. You can probably figure out how it works.

Modify the Linkbot Buzzer program to play every third key on the piano from the 34th key up to the 74th key.

Solution
import barobo
dongle = barobo.Dongle()
dongle.connect()
robotID = input('Enter Linkbot ID: ')
import time       # imports the Python "time" module because we want to use "time.sleep()" later.
key=34            # Set key=34 which is the 34th key on a piano keyboard.
while key < 74:   # While the key number is less than 74.
robot.setBuzzerFrequency(2**((key-49)/12.0)*440)  # Play the frequency to the corresponding note.
time.sleep(.25)   # Play the note for 0.25 seconds.
robot.setBuzzerFrequency(0)  # Turn off the note
key=key+3         # Increase the key number by 3. This is the end of the loop. At this point,
# Python will check to see if the condition in the "while" statement,
# "key < 74", is true. If it is still true, Python will go back to the
# beginning of the loop. If not, the program exits the loop.


 Learning Python 3 with the Linkbot ← Who Goes There? Count to 10 Decisions →