An LMI-based state feedback approach that ensures optimum path tracking and improved steady state performance of a quadrotor in both translational and rotational movements.
The motion of Quad Copter in 6DOF is controlled by varying the rpm of four rotors individually, thereby changing the vertical, horizontal and rotational forces.
- The structure is symmetric, thus the inertia matrices are diagonal.
- The center of mass corresponds to the origin of the physical coordinate system.
- A quadcopter is a rigid body.
State Space Representation[edit | edit source]
where x(t) is state vector, y(t) is output vector and u(t) is Input or control vector.
- A is the system matrix
- B is the input matrix
- C is the output matrix
- D is the feed forward matrix
Quadcopter modelling with 6 degree of freedom[edit | edit source]
parameter
|
description
|
x
|
position along x axis
|
y
|
position along y axis
|
z
|
position along z axis(height)
|
x'
|
velocity along x axis
|
y'
|
velocity along y axis
|
z'
|
velocity along z axis
|
Φ
|
Roll angle
|
θ
|
pitch angle
|
ψ
|
yaw angle
|
Φ'
|
Roll rate
|
θ'
|
pitch rate
|
ψ'
|
yaw rate
|
The state vector x is
The Input matrix u is, , where
- U1 is the Total Upward Force on the quadrotor along z-axis ( T-mg)
- U2 is the Pitch Torque (about x-axis)
- U3 is the Roll Torque (about y-axis)
- U4 is the Yaw Torque (about z-axis)
The Output matrix y is
The State differential equations written in matrix form as,
= +
The above martices represents the equation
=+
The above martices represents the equation
Solving the above LMI yields the unknown coefficients of the feedback control. The system will be then asymptotically stable and path track will be achieved.
This LMI can be used to analyze the state feedback control and path tracking of a quadcopter.
This LMI can be used in a problem and can be solved using the solvers like Yalmip,sedumi,gurobi etc,.