HydroGeoSphere/TECPLOT

From Wikibooks, open books for an open world
Jump to navigation Jump to search

The following instructions can be used to export data generated by grok to TECPLOT.

Mesh to tecplot[edit | edit source]

  1. tecfile The name of the file to which the 3-D mesh information (blocks or prisms) will be written in TECPLOT-readable format.
• • •

Wells to tecplot[edit | edit source]

  1. tec_wells_file Name of the file to which the 1-D well element information will be written in TECPLOT LINE3D geometry format.
• • •

Tiles to tecplot[edit | edit source]

  1. tec_tiles_file Name of the file to which the 1-D tile drain element information will be written in TECPLOT LINE3D geometry format.
• • •

K to tecplot[edit | edit source]

  1. tecfile The name of the file to which the hydraulic conductivity information (blocks or prisms) will be written in TECPLOT-readable format.

They are written as cell-based (i.e. elemental) variables for each of the principal coordinate directions.

• • •

Porosity to tecplot[edit | edit source]

  1. tecfile The name of the file to which the porosity information (blocks or prisms) will be written in TECPLOT-readable format.
• • •

Tortuosity to tecplot[edit | edit source]

  1. tecfile The name of the file to which the tortuosity information (blocks or prisms) will be written in TECPLOT-readable format.
• • •