CCNA Certification/Transport Layer
Acknowledgements — Introduction — The OSI Model — Application Layer — Transport Layer — Network Layer — Addressing — Routing Protocols — Data Link Layer — Switching — Physical Layer — Router Operation — Advanced Addressing Topics — Advanced Routing Topics — Advanced Switching Topics — Security — WAN — Configuration — Conclusion — References — About the Exam — Cisco Router Commands — Quick Reference Sheet
Transport Layer
[edit | edit source]The transport layer is the second highest layer in the TCP/IP reference model. It responds to service requests from the application layer and issues service requests to the network layer. It is also the name of layer four of the seven layer OSI model, where it responds to service requests from the session layer and issues service requests to the network layer. The definitions of the transport layer are slightly different in these two models. The following text primarily refers to the TCP/IP model.
The transport layer provides transparent transfer of data between hosts. It is usually responsible for end-to-end connection, error recovery, flow control, and ensuring complete data transfer. In the Internet protocol suite(TCP/IP) this function is most commonly achieved by the connection oriented Transmission Control Protocol (TCP). The datagram-type transport, User Datagram Protocol (UDP), provides neither error recovery nor flow control, leaving these to the application. The purpose of the Transport layer is to provide transparent transfer of data between end users, thus relieving the upper layers from any concern with providing reliable and cost-effective data transfer.
The transport layer usually turns the unreliable and very basic service provided by the Network layer into a more powerful one. There is a long list of services that can be optionally provided at this level. None of them are compulsory, because not all applications want all the services available. Some can be wasted overhead, or even counterproductive in some cases.
- Connection-oriented
- This is normally easier to deal with than connection-less models, so where the Network layer only provides a connection-less service, often a connection-oriented service is built on top of that in the Transport layer.
- Same Order Delivery
- The Network layer doesn't generally guarantee that packets of data will arrive in the same order that they were sent, but often this is a desirable feature, so the Transport layer provides it. The simplest way of doing this is to give each packet a number, and allow the receiver to reorder the packets.
- Reliable Data
- Packets may be lost in routers, switches, bridges and hosts due to network congestion, when the packet queues are filled and the network nodes have to delete packets. Packets may be lost or corrupted in for example Ethernet due to interference and noise, since Ethernet does not retransmit corrupt packets. Packets may be delivered in the wrong order by an underlying network. Some transport layer protocols, for example TCP, can fix this. By means of an error detection code, for example a checksum, the transport protocol may check that the data is not corrupted, and verify that by sending an ACK message to the sender. Automatic repeat request schemes may be used to retransmit lost or corrupted data. By introducing segment numbering in the transport layer packet headers, the packets can be sorted in order. Of course, error free is impossible, but it is possible to substantially reduce the numbers of undetected errors.
- Flow Control
- The amount of memory on a computer is limited, and without flow control a larger computer might flood a computer with so much information that it can't hold it all before dealing with it. Nowadays, this is not a big issue, as memory is cheap while bandwidth is comparatively expensive, but in earlier times it was more important. Flow control allows the receiver to say "Whoa!" before it is overwhelmed. Sometimes this is already provided by the network, but where it is not, the Transport layer may add it on.
- Congestion avoidance
- Network congestion occurs when a queue buffer of a network node is full and starts to drop packets. Automatic repeat request may keep the network in a congested state. This situation can be avoided by adding congestion avoidance to the flow control, including slow-start. This keeps the bandwidth consumption at a low level in the beginning of the transmission, or after packet retransmission.
- Byte orientation
- Rather than dealing with things on a packet-by-packet basis, the Transport layer may add the ability to view communication just as a stream of bytes. This is nicer to deal with than random packet sizes, however, it rarely matches the communication model which will normally be a sequence of messages of user defined sizes.
- Ports
- (Part of the transport layer in the TCP/IP model, but of the session layer in the OSI model) Ports are essentially ways to address multiple entities in the same location. For example, the first line of a postal address is a kind of port, and distinguishes between different occupants of the same house. Computer applications will each listen for information on their own ports, which is why you can use more than one network-based application at the same time.
On the Internet there are a variety of Transport services, but the two most common are TCP and UDP. TCP is the more complicated, providing a connection and byte oriented stream which is almost error free, with flow control, multiple ports, and same order delivery. UDP is a very simple 'datagram' service, which provides limited error reduction and multiple ports. TCP stands for Transmission Control Protocol, while UDP stands for User Datagram Protocol. Other options are the Datagram Congestion Control Protocol (DCCP) and Stream Control Transmission Protocol (SCTP).
Some things, such as connection orientation can be implemented at either Transport or Network layer. The idea is that the Network layer implements whatever set of options is easiest: for some underlying networks it is easiest to implement connectionless communication, while for others it is easiest to implement connection oriented communication. The Transport layer uses this simplest set of options to implement whatever combinations of options are actually desired.
Transport protocol comparison table
[edit | edit source]TCP | UDP | SCTP | |
---|---|---|---|
Packet header size | 20 Bytes | 8 Bytes | |
Packet entity | Segment | Datagram | |
Error checking | Yes | Yes | Yes |
Port numbering | Yes | Yes | Yes |
Connection oriented | Yes | No | Yes |
Automatic repeat request (ARQ) | Yes | No | |
Segment numbering | Yes | No | |
Flow control | Yes | No | |
Congestion avoidance | Yes | No |
TCP
[edit | edit source]The Transmission Control Protocol (TCP) is one of the core protocols of the Internet protocol suite, often simply referred to as TCP/IP. Using TCP, applications on networked hosts can create connections to one another, over which they can exchange streams of data using Stream Sockets. The protocol guarantees reliable and in-order delivery of data from sender to receiver. TCP also distinguishes data for multiple connections by concurrent applications (e.g., Web server and e-mail server) running on the same host.
TCP supports many of the Internet's most popular application protocols and resulting applications, including the World Wide Web, e-mail, File Transfer Protocol and Secure Shell.
In the Internet protocol suite, TCP is the intermediate layer between the Internet Protocol (IP) below it, application above it. Applications often need reliable pipe-like connections to each other, whereas the Internet Protocol does not provide such streams, but rather only best effort delivery (i.e., unreliable packets). TCP does the task of the transport layer in the simplified OSI model of computer networks. The other main transport-level Internet protocol is UDP.
Applications send streams of octets (8-bit bytes) to TCP for delivery through the network, and TCP divides the byte stream into appropriately sized segments (usually delineated by the maximum transmission unit (MTU) size of the data link layer of the network to which the computer is attached). TCP then passes the resulting packets to the Internet Protocol, for delivery through a network to the TCP module of the entity at the other end. TCP checks to make sure that no packets are lost by giving each packet a sequence number, which is also used to make sure that the data are delivered to the entity at the other end in the correct order. The TCP module at the far end sends back an acknowledgment for packets which have been successfully received; a timer at the sending TCP will cause a timeout if an acknowledgment is not received within a reasonable round-trip time ( RTT), and the (presumably lost) data will then be re-transmitted. The TCP checks that no bytes are damaged by using a checksum; one is computed at the sender for each block of data before it is sent, and checked at the receiver.
UDP
[edit | edit source]The User Datagram Protocol (UDP) is one of the core protocols of the Internet protocol suite. Using UDP, programs on networked computers can send short messages sometimes known as datagrams to one another. UDP is sometimes called the Universal Datagram Protocol or Unreliable Datagram Protocol.
UDP does not provide the reliability and ordering that TCP does. Datagrams may arrive out of order, appear duplicated, or go missing without notice. Without the overhead of checking whether every packet actually arrived, UDP is faster and more efficient for many lightweight or time-sensitive purposes. Also, its stateless nature is useful for servers that answer small queries from huge numbers of clients. Compared to TCP, UDP is required for Broadcasting (send to all on local network) and multicast (send to all subscribers).
Common network applications that use UDP include the Domain Name System (DNS), streaming media applications such as IPTV, Voice over IP (VoIP), Trivial File Transfer Protocol (TFTP) and online games.
Ports
[edit | edit source]UDP utilizes ports to allow application-to-application communication. The port field is 16-bits so the valid range is 0 to 65,535. Port 0 is reserved, but is a permissible source port value if the sending process does not expect messages in response.
Ports 1 through 1023 are named "well-known" ports and on Unix-derived operating systems binding to one of these ports requires root access.
Ports 1024 through 49,151 are registered ports.
Ports 49,152 through 65,535 are ephemeral ports and are used as temporary ports primarily by clients when communicating to servers.