Jump to content

Haskell/Lists and tuples

From Wikibooks, open books for an open world
(Redirected from Haskell/List basics)

Haskell uses two fundamental structures for managing several values: lists and tuples. They both work by grouping multiple values into a single combined value.

Lists

[edit | edit source]

Let's build some lists in GHCi:

Prelude> let numbers = [1,2,3,4]
Prelude> let truths  = [True, False, False]
Prelude> let strings = ["here", "are", "some", "strings"]

The square brackets delimit the list, and individual elements are separated by commas. The only important restriction is that all elements in a list must be of the same type. Trying to define a list with mixed-type elements results in a typical type error:

Prelude> let mixed = [True, "bonjour"]

<interactive>:1:19:
    Couldn't match `Bool' against `[Char]'
      Expected type: Bool
      Inferred type: [Char]
    In the list element: "bonjour"
    In the definition of `mixed': mixed = [True, "bonjour"]

Building lists

[edit | edit source]

In addition to specifying the whole list at once using square brackets and commas, you can build them up piece by piece using the (:) operator pronounced "cons". The process of building up a list this way is often referred to as consing. This terminology comes from LISP programmers who invented the verb "to cons" (a mnemonic for "constructor") to refer to this specific task of prepending an element to a list.

Example: Consing something on to a list

Prelude> let numbers = [1,2,3,4]
Prelude> numbers
[1,2,3,4]
Prelude> 0:numbers
[0,1,2,3,4]

When you cons something on to a list (something:someList), you get back another list. Thus, you can keep on consing for as long as you wish. Note that the cons operator evaluates from right to left. Another (more general) way to think of it is that it takes the first value to its left and the whole expression to its right.

Example: Consing lots of things to a list

Prelude> 1:0:numbers
[1,0,1,2,3,4]
Prelude> 2:1:0:numbers
[2,1,0,1,2,3,4]
Prelude> 5:4:3:2:1:0:numbers
[5,4,3,2,1,0,1,2,3,4]

In fact, Haskell builds all lists this way by consing all elements to the empty list, []. The commas-and-brackets notation are just syntactic sugar. So [1,2,3,4,5] is exactly equivalent to 1:2:3:4:5:[]

You will, however, want to watch out for a potential pitfall in list construction. Whereas True:False:[] is perfectly good Haskell, True:False is not:

Example: Whoops!

Prelude> True:False

<interactive>:1:5:
    Couldn't match `[Bool]' against `Bool'
      Expected type: [Bool]
      Inferred type: Bool
    In the second argument of `(:)', namely `False'
    In the definition of `it': it = True : False

True:False produces a familiar-looking type error message. It tells us that the cons operator (:) (which is really just a function) expected a list as its second argument, but we gave it another Bool instead. (:) only knows how to stick things onto lists.[1]

So, when using cons, remember:

  • The elements of the list must have the same type.
  • You can only cons (:) something onto a list, not the other way around (you cannot cons a list onto an element). So, the final item on the right must be a list, and the items on the left must be independent elements, not lists.
Exercises
  1. Would the following piece of Haskell work: 3:[True,False]? Why or why not?
  2. Write a function cons8 that takes a list as an argument and conses 8 (at the beginning) on to it. Test it out on the following lists by doing:
    1. cons8 []
    2. cons8 [1,2,3]
    3. cons8 [True,False]
    4. let foo = cons8 [1,2,3]
      cons8 foo
  3. Adapt the above function in a way that 8 is at the end of the list. (Hint: recall the concatenation operator ++ from the previous chapter.)
  4. Write a function that takes two arguments, a list and a thing, and conses the thing onto the list. You can start out with:
let myCons list thing =

Strings are just lists

[edit | edit source]

As we briefly mentioned in the Type Basics module, strings in Haskell are just lists of characters. That means values of type String can be manipulated just like any other list. For instance, instead of entering strings directly as a sequence of characters enclosed in double quotation marks, they may also be constructed through a sequence of Char values, either linked with (:) and terminated by an empty list or using the commas-and-brackets notation.

Prelude> "hey" == ['h','e','y']
True
Prelude> "hey" == 'h':'e':'y':[]
True

Using double-quoted strings is just more syntactic sugar.

Lists of lists

[edit | edit source]

Lists can contain anything — as long as they are all of the same type. Because lists are things too, lists can contain other lists! Try the following in the interpreter:

Example: Lists can contain lists

Prelude> let listOfLists = [[1,2],[3,4],[5,6]]
Prelude> listOfLists
[[1,2],[3,4],[5,6]]

Lists of lists can be tricky sometimes because a list of things does not have the same type as a thing all by itself. The type Int is different from [Int]. Let's sort through these implications with a few exercises:

Exercises
  1. Which of these are valid Haskell and which are not? Rewrite in cons notation.
    1. [1,2,3,[]]
    2. [1,[2,3],4]
    3. [[1,2,3],[]]
  2. Which of these are valid Haskell, and which are not? Rewrite in comma and bracket notation.
    1. []:[[1,2,3],[4,5,6]]
    2. []:[]
    3. []:[]:[]
    4. [1]:[]:[]
    5. ["hi"]:[1]:[]
  3. Can Haskell have lists of lists of lists? Why or why not?
  4. Why is the following list invalid in Haskell?
    1. [[1,2],3,[4,5]]

Lists of different types of things cannot be consed, but the empty list can be consed with lists of anything. For example, []:[[1, 2], [1, 2, 3]] is valid and will produce [[], [1, 2], [1, 2, 3]], and [1]:[[1, 2], [1, 2, 3]] is valid and will produce [[1], [1, 2], [1, 2, 3]], but ['a']:[[1, 2], [1, 2, 3]] will produce an error message.

Lists of lists allow us to express some kinds of complicated, structured data (two-dimensional matrices, for example). They are also one of the places where the Haskell type system truly shines. Human programmers (including this wikibook co-author) get confused all the time when working with lists of lists, and having restrictions on types often helps in wading through the potential mess.

Tuples

[edit | edit source]

A different notion of many

[edit | edit source]

Tuples offer another way of storing multiple values in a single value. Tuples and lists have two key differences:

  • Tuples have a fixed number of elements (immutable); you can't cons to a tuple. Therefore, it makes sense to use tuples when you know in advance how many values are to be stored. For example, we might want a type for storing 2D coordinates of a point. We know exactly how many values we need for each point (two – the x and y coordinates), so tuples are applicable.
  • The elements of a tuple do not need to be all of the same type. For instance, in a phonebook application we might want to handle the entries by crunching three values into one: the name, phone number, and the number of times we made calls. In such a case the three values won't have the same type, since the name and the phone number are strings, but contact counter will be a number, so lists wouldn't work.

Tuples are marked by parentheses with elements delimited by commas. Let's look at some sample tuples:

Example: Some tuples

(True, 1)
("Hello world", False)
(4, 5, "Six", True, 'b')

The first example is a tuple containing two elements: True and 1. The next example again has two elements: "Hello world" and False. The third example is a tuple consisting of five elements: 4 (a number), 5 (another number), "Six" (a string), True (a boolean value), and 'b' (a character).

A quick note on nomenclature: In general you use n-tuple to denote a tuple of size n. Commonly, we call 2-tuples (that is, tuples with 2 elements) pairs and 3-tuples triples. Tuples of greater sizes aren't actually all that common, but we can logically extend the naming system to quadruples, quintuples, and so on.

Exercises
  1. Write down the 3-tuple whose first element is 4, second element is "hello" and third element is True.
  2. Which of the following are valid tuples?
    1. (4, 4)
    2. (4, "hello")
    3. (True, "Blah", "foo")
    4. ()
  3. Lists can be built by consing new elements onto them. Cons a number onto a list of numbers, you will get back a list of numbers. There is no such way to build up tuples.
    1. Why do you think that is?
    2. For the sake of argument, say that there was such a function. What would you get if you "consed" something on a tuple?


Tuples are handy when you want to return more than one value from a function. In many languages, returning two or more things at once often requires wrapping them up in a single-purpose data structure, maybe one that only gets used in that function. In Haskell, we would return such results as a tuple.

Tuples within tuples (and other combinations)

[edit | edit source]

We can apply the same reasoning to tuples about storing lists within lists. Tuples are things too, so you can store tuples within tuples (within tuples up to any arbitrary level of complexity). Likewise, you could also have lists of tuples, tuples of lists, and all sorts of related combinations.

Example: Nesting tuples and lists

((2,3), True)
((2,3), [2,3])
[(1,2), (3,4), (5,6)]

The type of a tuple is defined not only by its size, but, like lists, by the types of objects it contains. For example, the tuples ("Hello",32) and (47,"World") are fundamentally different. One is of type (String,Int), whereas the other is (Int,String). This has implications for building up lists of tuples. We could very well have lists like [("a",1),("b",9),("c",9)], but Haskell cannot have a list like [("a",1),(2,"b"),(9,"c")].

Exercises
  1. Which of these are valid Haskell, and why?
    • 1:(2,3)
    • (2,4):(2,3)
    • (2,4):[]
    • [(2,4),(5,5),('a','b')]
    • ([2,4],[2,2])

Retrieving values

[edit | edit source]

For lists and tuples to be useful, we will need to access the internal values they contain.

Let's begin with pairs (i.e. 2-tuples) representing the (x, y) coordinates of a point. Imagine you want to specify a specific square on a chess board. You could label the ranks and files from 1 to 8. Then, a pair (2, 5) could represent the square in rank 2 and file 5. Say we want a function for finding all the pieces in a given rank. We could start with the coordinates of all the pieces and then look at the rank part and see whether it equals whatever row we want to examine. Given a coordinate pair (x, y) of a piece, our function would need to extract the x (the rank coordinate). For this sort of goal, there are two standard functions, fst and snd, that retrieve[2] the first and second elements out of a pair, respectively. Let's see some examples:

Example: Using fst and snd

Prelude> fst (2, 5)
2
Prelude> fst (True, "boo")
True
Prelude> snd (5, "Hello")
"Hello"

Note that these functions, by definition, only work on pairs.[3]

For lists, the functions head and tail are roughly analogous to fst and snd. They disassemble a list by taking apart what (:) joined. head evaluates to the first element of the list, while tail gives the rest of the list.

Example: Using head and tail

Prelude> 2:[7,5,0]
[2,7,5,0]
Prelude> head [2,7,5,0]
2
Prelude> tail [2,7,5,0]
[7,5,0]


Note

Unfortunately, we have a serious problem with head and tail. If we apply either of them to an empty list...

Prelude> head []
*** Exception: Prelude.head: empty list

... it blows up, as an empty list has no first element, nor any other elements at all. Outside of GHCi, attempting to run head or tail on the empty list will crash a program.

We will play with head and tail for the moment, but we want to avoid any risk of such malfunctions in our real code, so we will learn later about better options. One might ask "What is the problem? Using head and tail works fine if we are careful and never pass them an empty list, or if we somehow test whether a list is empty before calling them." But that way lies madness.

As programs get bigger and more complicated, the number of places in which an empty list could end up being passed to head and tail grows quickly as does the number of places in which we might make a mistake. As a rule of thumb, you should avoid functions that might fail without warning. As we advance through the book, we will learn better ways to avoid these risks.


Pending questions

[edit | edit source]

The four functions introduced here do not appear to fully solve the problem we started this section with. While fst and snd provide a satisfactory solution for pairs, what about tuples with three or more elements? And with lists, can we do any better than just breaking them after the first element? For the moment, we will have to leave these questions pending. Once we do some necessary groundwork, we will return to this subject in future chapters on list manipulation. For now, know that separating head and tail of a list will allow us to do anything we want.

Exercises
  1. Use a combination of fst and snd to extract the 4 from the tuple (("Hello", 4), True).
  2. Normal chess notation is somewhat different to ours: it numbers the rows from 1-8 and the columns a-h; and the column label is customarily given first. Could we label a specific point with a character and a number, like ('a', 4)? What important difference with lists does this illustrate?
  3. Write a function which returns the head and the tail of a list as the first and second elements of a tuple.
  4. Use head and tail to write a function which gives the fifth element of a list. Then, make a critique of it, pointing out any annoyances and pitfalls you notice.

Polymorphic types

[edit | edit source]

Recall that the type of a list depends on the types of its elements and is denoted by enclosing it in square brackets:

Prelude> :t [True, False]
[True, False] :: [Bool]
Prelude> :t ["hey", "my"]
["hey", "my"] :: [[Char]]

Lists of Bool are a different type than lists of [Char] (which is the same as a list of String because [Char] and String are synonyms). Since functions only accept arguments of the types specified in the type of the function, that might lead to some complications. For example, consider the case of head. Given that [Int], [Bool] and [String] are different types, it seems we would need separate functions for every case – headInt :: [Int] -> Int, headBool :: [Bool] -> Bool, headString :: [String] -> String, and so on… That, however, would be not only very annoying but also rather senseless. After all, lists are assembled in the same way regardless of the types of the values they contain, and so we would expect the procedure to get the first element of the list would remain the same in all cases.

Fortunately, we do have a single function head, which works on all lists:

Prelude> head [True, False]
True
Prelude> head ["hey", "my"]
"hey"

How can that possibly work? As usual, checking the type of head provides a good hint:

Example: Our first polymorphic type

Prelude> :t head
head :: [a] -> a

The a in the signature is not a type – remember that type names always start with uppercase letters. Instead, it is a type variable. When Haskell sees a type variable, it allows any type to take its place. In type theory (a branch of mathematics), this is called polymorphism: functions or values with only a single type are called monomorphic, and things that use type variables to admit more than one type are polymorphic. The type of head, for instance, tells us that it takes a list ([a]) of values of an arbitrary type (a) and gives back a value of that same type (a).

Note that within a single type signature, all cases of the same type variable must be of the same type. For example,

f :: a -> a

means that f takes an argument of any type and gives something of the same type as the result, as opposed to

f :: a -> b

which means that f takes an argument of any type and gives a result of any type which may or may not match the type of whatever we have for a. The different type variables do not specify that the types must be different, it only says that they can be different.

Example: fst and snd

[edit | edit source]

As we saw, you can use the fst and snd functions to extract parts of pairs. By now, you should already be building the habit of wondering "what type is this?" for every function you come across. Let's consider the cases of fst and snd. These two functions take a pair as their argument and return one element of this pair. As with lists, the type of a pair depends on the type of its elements, so the functions need to be polymorphic. Also remember that pairs (and tuples in general) don't have to be homogeneous with respect to internal types. So if we were to say:

fst :: (a, a) -> a

That would mean fst would only work if the first and second part of the pair given as input had the same type. So the correct type is:

Example: The types of fst and snd

fst :: (a, b) -> a
snd :: (a, b) -> b

If you knew nothing about fst and snd other than the type signatures, you might still guess that they return the first and second parts of a pair, respectively. Although that is correct, other functions may have this same type signature. All the signatures say is that they just have to return something with the same type as the first and second parts of the pair, respectively.

Exercises

Give type signatures for the following functions:

  1. The solution to the third exercise of the previous section ("... a function which returns the head and the tail of a list as the first and second elements of a tuple").
  2. The solution to the fourth exercise of the previous section ("... a function which gives the fifth element of a list").
  3. h x y z = chr (x - 2) (remember we discussed chr in the previous chapter).

Summary

[edit | edit source]

This chapter introduced lists and tuples. The key similarities and differences between them are:

  1. Lists are defined by square brackets and commas : [1,2,3].
    • Lists can contain anything as long as all the elements of the list are of the same type.
    • Lists can also be built by the cons operator, (:), but you can only cons things onto lists.
  2. Tuples are defined by parentheses and commas : ("Bob",32)
    • Tuples can contain anything, even things of different types.
    • The length of a tuple is encoded in its type; tuples with different lengths will have different types.
  3. Lists and tuples can be combined in any number of ways: lists within lists, tuples within lists, etc, but their criteria must still be fulfilled for the combinations to be valid.

Notes

  1. At this point you might question the value of types. While they can feel annoying at first, more often than not they turn out to be extremely helpful. In any case, when you are programming in Haskell and something blows up, you'll probably want to think "type error".
  2. Or, more technically, "... projections that project the elements..." In math-speak, a function that gets some data out of a structure is called a projection.
  3. Yes, a function could be designed to extract the first thing from any size tuple, but it wouldn't be as simple as you might think, and it isn't how the fst and snd functions from the standard libraries work.