A-level Physics (Advancing Physics)/Resistivity and Conductivity

From Wikibooks, open books for an open world
Jump to navigation Jump to search

Resistivity and conductivity are material properties: they apply to all examples of a certain material anywhere. They are not the same as resistance and conductance, which are properties of individual artefacts. This means that resistivity and conductivity only apply to a given object. They describe how well a material resists or conducts an electric current.

Symbols and Units

Resistivity is usually represented by the Greek letter rho (ρ), and is measured in Ω m. Conductivity is usually represented by the Greek letter sigma (σ), and is measured in S m-1.

Formulae

The formula relating resistivity (ρ) to resistance (R), cross-sectional area (A) and length (L) is:

Conductivity is the reciprocal of resistivity, just as conductance (G) is the reciprocal of resistance. Hence:

You should be able to rearrange these two formulae to be able to work out resistance, conductance, cross-sectional area and length. For example, it all makes a lot more sense if we write the first formula in terms of ρ, A and L:

From this, we can see that the resistance of a lump of material is higher if it has a higher resistivity, or if it is longer. Also, if it has a larger cross-sectional area, its resistance is smaller.

Questions

1. The substation of the bar bus is made up of 2-inches round copper bars 20ft long.what is the resistance of each bar if resistivity is1.724×10?

2. A pure copper wire has a radius of 0.5mm, a resistance of 1 MΩ, and is 4680 km long. What is the resistivity of copper?

3. Gold has a conductivity of 45 MS m-1. What is the resistance of a 0.01m across gold connector, 0.05m long?

4. A strand of metal is stretched to twice its original length. What is its new resistance? State your assumptions.

5. Which has the greater resistivity: a plank or a piece of sawdust, made from the same wood?

Worked Solutions