Short guide to the use of laser cutting machines/Plywood locker divider
This project will create a plywood surface that will divide a locker in 2 parts.
Locker dimensions and description
[edit | edit source]This particular locker has 3 holders in both sides and one holder in the rear wall, this will be used to support the divider.
Wide: 13 inches. Deep: 12 Height: 20inches.
3 metallic hook holders are in each wall of the locker. The height of the lateral metallic hoosk are: The locker dimensions are 12.5 wide.
Divider design
[edit | edit source]The divider consists in 2 sections, the divider itself and a vertical support that will support the divider using the rear metallic hook as support.
Divider design
[edit | edit source]It will consist in a rectangle 12x10 inches with three holes, 2 lateral holes that will be supported in the 2 lateral metallic hooks and one rear hole that will receive the vertical support that will be supported in the rear metallic hook.
Vertical support design
[edit | edit source]It will have a cross like shape that will function as arms and it's lower part will be placed over the metallic hook.