Interwiki.py creates Interlanguage links between the different language versions of a project.
- 1 Getting started
- 2 Working on more than one page
- 3 Using hints
- 4 Automatic translation
- 5 Avoiding unwanted links
- 6 Working with the logfile
- 7 Overview of the options
- 8 Global arguments available for all bots
- 9 See also
We assume you have taken these steps (downloading Python and bot, creating user-config.py, running login.py). Now to start, type "interwiki.py" (without the "'s), or if that does not work, "python interwiki.py".
The bot will ask for a page to check. Give a page on your home Wikipedia, preferably one with one or more interwiki-links that could however have more. The bot will read this page, and if it has any interwiki-links, it will check those pages as well, and the interwiki-links from those, etcetera. After it has finished that, what happens on what pages it found.
- If the page has no interwiki links, or if the links found are identical to the ones on the page, the bot will stop silently.
- If the bot finds interwiki links to new languages, or finds that an interwiki-link has to be changed, it will do so.
- If the bot finds that an interwiki link is to be removed, it will ask your permission to do so.
- If the bot finds more than one page for a language, it will go into an interactive mode. It will give the pages found with the pages that link to that page, and ask for each language with more than one link, which if any should be linked to, then ask for each language with one link whether it should be linked.
Note that these behaviours can be changed using options, see below.
You can also specify the page to work on directly, using "interwiki.py pagename". But there are more possibilities, see below.
Working on more than one page
Using the XML Export, the pywikipediabot-software can get more pages at once, upto 60 at a time. To use this possibility, you can use the bot on a set of pages. The most common form is getting pages in alphabetical order from Special:Allpages, using the -start option.
If you add the option -start, the bot will go through the pages alphabetically, starting at the word specified. If you want to start at the letter B, for example, you can use "interwiki.py -start:B". In particular, if you want to do the whole Wiki, you can use "interwiki.py -start:!"
Restarting: -continue, -restore
Going through the whole wiki can, in large or even moderately large wikis, take a long time. Thus, it may well happen that you are forced to end the program before it has finished. In that case you can use "interwiki.py -continue" next time. The bot, when it crashes or is stopped (through control-c), will make a file specifying the pages it is working on. If you use the continue-option, it will continue with those pages, and after that continue alphabetically. If you want to restart a non-alphabetical run, you can use "interwiki.py -restore" instead. It will just restart the pages it was working on.
Be warned that only the last bot run that was stopped will be recoverable. The bot will save its information to a file interwiki.dump, and if another run is broken off, even if it is only on one page, it will overwrite the file.
When working on a lot of pages, you may want the bot to just continue, rather than asking you every time it sees a problem. This is done by adding the option "-autonomous". If this option is used, the bot will skip all problems and removals, and save a log of those in autonomous_problems.dat. If you want it to do removals as well, add the "-force" option too; in that case it is good to check the removals afterward (often a page is removed because of a correctable typo).
The file sax_parse_bug.dat
Sometimes there is an error message mentioning a file sax_parse_bug.dat on the screen while running interwiki.py, and then it starts retrieving some pages one-by-one instead of in a single batch. This is caused by an illegal character in one of the pages to be retrieved.
The tool xmltest.py can be used to trace this problem. Run it with the filename as argument:
python xmltest.py sax_parse_bug.dat
This will generate a python stack trace. The last line of that stack trace will show a line number and column where the illegal character is in the file. Please check this position, and if possible, correct the wiki page associated with it.
Running on years AD
There is a special option -years that makes sure not to follow links to centuries and decennia that are common on some wikipedias (like ja:). Even then, this option should be used in combination with an exceptions file (see below) because the la: and ia: number pages are about the numbers and not about the years.
python interwiki.py -autonomous -years
This will take a while to start up while it is preparing hints for all pages named [] through []
If you stop the robot during a -years run and want to restart it later, you can tell the robot at which page to restart by using -years:XYZ where XYZ is the year where the robot stopped last time. You can also make the robot start B.C. by making XYZ a negative number.
python interwiki.py -autonomous -years:-500
Running on a simple list of pages
Sometimes you have a list of pages available. Just a file of subjects, each subject on a separate line, formatted as [[xx:yyy]] comments. The -file option can be used to run the interwiki bot over such a list of subjects. An example of such a file could be an autonomous_problem.dat file that you want to treat manually:
python interwiki.py -file:autonomous_problem.dat
Upto now, we have only worked on adding interwikis on pages that already have some. But the bot can also be used to add them on pages that have none yet. This is done by using hints. If for example you want to add interwikis to the page [[en:House]], and think there might be a page at [[fr:Maison]] that would be about the same subject, you can type (if your bot is set to run on English by default) "interwiki.py House -hint:fr:Maison".
If the link is to the same title, you can remove the title, and even the second :. Also, if you want to link to the same word in several languages, you can combine them with commas. So instead of "interwiki.py Albert Einstein -hint:de:Albert_Einstein -hint:fr:Albert_Einstein -hint:id:Albert_Einstein" (those underscores are necessary, otherwise the bot will regard the 'Einstein' part of the pagename), you can write "interwiki.py Albert Einstein -hint:de,fr,id",
Some special hints have been defined to do a number of languages at once. You can use them instead of the language part of a hint. Currently the following special hints exist for Wikipedia:
- 10: Ten of the largest Wikipedias
- 20,30,50: Idem, for twenty, thirty and fifty languages
- all: All Wikipedias with at least ~100 articles
- cyril: All languages in Cyrillic script
The same are defined for Wiktionary, but at the moment of writing, 30, 50 and all are the same for Wiktionary. It is intended to add more options.
Asking for hints
When working on multiple pages such hints in the command line are rarely useful. In that case (or if you want to decide on the hints later), you can use the options "-askhints", "-untranslated" and "-untranslatedonly". If you choose the -askhints option, for each page you will be asked for one or more hints. They can be like the hints after -hint: on the command line, but the ':' may not be omitted, and spaces are allowed. Thus, valid hints would for example be "en:John Smith", "de,nds,af:" or "50:". "-untranslated" asks for hints only if there are no interwiki links yet; "-untranslatedonly" is like -untranslated, but other pages are not worked on at all.
Instead of giving a hint, you can give an empty line. This specifies that all hints for this page have been given (or that you have no hints for it). Note that if you have given a hint, the bot will keep asking for more hints until you press enter. Another option is to input a question mark and nothing else; in that case you get shown the beginning of the text to the page. If after that you input the question mark again, it will give a larger part of the text, etcetera.
It might in these cases be useful to have the "-confirm" option added, so the bot gets interactive before making a change. This can be used to check whether the links are correct and/or as an impetus to create a backlink.
For Wiktionary there is the special "-wiktionary" option. It works like "-hint:all", but has some extras because on Wiktionary some languages use capitalisation and others don't, and links to another word are never correct.
On non-capitalising wiktionaries, links to capitalising wiktionaries are only added for capitalised words. Also, any link found to a word that differs more than just in capitalisation, is ignored completely.
For years (both AD and BC) and days of the year, the bot can automatically translate it in a large number of languages. If you do not want this automatic translation (for example because it takes long to go over such a large number of languages), it can be switched off with the "-noauto" option.
With the option "-years:" followed by a number (positive or negative), the bot goes through the years from the given year to 2050. If "-years" without any addition is given, the beginning year is taken to be the year 1.
With the option "-days" the bot goes through the days of the year; however, this bot only works correctly on nl:.
If you want to run the bot, but know that for a given page, it will get to links that it should not get, you can use the -noredirect or -neverlink or -select or -ignore options.
-noredirect means that if a redirect page is found, the redirect is not followed, as is the normal behaviour, but the page is skipped.
-neverlink:xx with xx: a language code means that any links to the language xx: are ignored.
-select lets you select or deselect every single links that is being found individually, before any page is changed.
-ignore:zxx:pagetitle excludes the page named "pagetitle" in language "zxx" and its interwiki links from inclusion, even if there are interwiki links pointing to it.
Working with the logfile
Each run of the interwiki.py program will write not only to the screen, but also to a file called logs/interwiki.log. You may have seen that once a subject is completed, a list of other Wikipedias interwiki links is printed preceded by 'WARNING:'. To use these lines, the interwiki.log file is more convenient than the screen.
First an explanation why this is important. Assume you have a page [[My Subject]] that links to [[fr:Mon Sujet]] and [[nl:Mijn Onderwerp]]. Assume also that neither the nl: nor the fr: page list your en: page: they only know each other. A run of interwiki.py on either fr: or nl: will not find your en: page. This can be referred to as the backlink problem: there can be an unknown language that link to the others, but as long as none of the others link back, there is no way of discovering the existance. Do we really need to add these backlinks manually? No, that is where the warnings come in. In the interwiki.log:
WARNING: fr:[[Mon Sujet]] does not link to [[en:My Subject]] WARNING: nl:[[Mijn Onderwerp]] does not link to [[en:My Subject]]
If the person running interwiki.py either on fr: or on nl: would have this information, that would be sufficient to get the network of links completed.
For this reason there is another option for the interwiki.py program:
python interwiki.py -warnfile:english_treelang.log
In this mode the program will read the warnfile, and start to process all of the pages that are mentioned for its home language using the "does not link to" lines as hints.
This process can still take a long time. If you trust the operator that sent you the log, and the log is recent, you can also do:
python warnfile.py english_treelang.log
This will not verify any of the suggestions in the warnfile, but blindly implement them at full speed, saving the Wikipedia server a lot of efforts.
Now, instead of sending the whole interwiki.log file to everyone, there is a special program to split it up:
This will read your interwiki.log and create files called warning_XX.log (one for each language) that are more convenient to use..
Overview of the options
Here is a list of the options, with an explanation of those that have not yet been discussed.
- -array: (usage: "-array:nn" with nn a number) When working on several pages, make sure to have at least this number of pages the bot is working on, if possible. The default value is 100; when using -untranslatedonly or a similar option, you might want to set it lower.
- -always: Always save the page, even if only one byte has changed (default: save the page only if at least one link has actually changed)
- -askhints: Ask hints (see above)
- -async: Puts the page on a queue to be saved to wiki asynchronously. This enables loading pages during saving throtteling and gives a better performance.
- -autonomous Work in autonomous mode (see above)
- -confirm Always ask permission before changing a page.
- -select Ask for each link whether it should be include before changing any page.
- -days: Work on the days
- -file: (usage: "-file:filename") Specifies a file containing a list of pages to process. (Page names are specified as [[project:lang:pagename]], [[lang:pagename]], or [[pagename]].
- -force: When an interwiki link is to be removed, just do it, don't ask for permission
- -hint: Give a hint (see above)
- -name: Old option; equivalent to "-hint:all", but capitalizes the last word when trying on eo:. Might get deprecated.
- -namespace: Number or name of namespace to process. Can be used multiple times. Do not use with the -start parameter (use something like -start:Category:! instead)
- -neverlink: Do not link to a specific language (see above)
- -noauto: Do not use automatic translation (see above)
- -nobacklink: Do not give a list of missing links on pages linked to
- -nobell: Give no audio sign when asking for input.
- -noredirect: If the bot finds a page linked to is a redirect, it is skipped (normal behaviour: It follows the redirect)
- -noshownew: Do not show new links found
- -number: (usage"-number:nn" with nn a number) In combination with -start, checks only the first nn pages rather than the whole wiki.
- -same: Old option; equivalent to "-hint:all"; might get deprecated
- -showpage: When using -askhints or some such option, always show the page text, even if not prompted.
- -skipfile: (usage "-skipfile:filename") On a run using -start, do not do the pages in the file start
- -untranslated: Ask hints for untranslated pages (see above)
- -untranslatedonly: Ask hints for untranslated pages (see above)
- -warnfile: Use the logfile for pages and hints (see above)
- -wiktionary: Special wiktionary options (see above)
- -years: Work on the years
||This page is out of date and needs to be updated
A Wikibookian thinks that this page is no longer accurate, and the material in it needs to be updated by an editor or author.
Once this page has been brought up to date, you can remove this tag
Global arguments available for all bots
|-family:xyz||Set the family of the wiki you want to work on, e.g. wikipedia, wiktionary, commons, wikitravel, …. This will override the configuration in user-config.py settings.||user-config.py parameter:
|-lang:xx||Set the language of the wiki you want to work on, overriding the configuration in user-config.py where xx should be the language code.||user-config.py parameter:
|-log||Enable the logfile. Logs will be stored in the logs subdirectory.||user-config.py parameter:
|-log:xyz||Enable the logfile, using xyz as the filename.|
|-nolog||Disable the logfile (if it's enabled by default).|
|Set the minimum time (in seconds) the bot will wait between saving pages.||user-config.py parameter:
|Make the program output more detailed messages than usual to the standard output about its current work, or progress, while it is proceeding. This may be helpful when debugging or dealing with unusual situations.||not selected|
- Commons uses 'commons' for
family; Meta uses 'meta' for both.