How to use a Motorola DVR/Resets

From Wikibooks, the open-content textbooks collection

Jump to: navigation, search
How to use a Motorola DVR
Identify | Connections | Setup | i-Guide | MSTV | Passport | Tivo | FireWire | Remote | Firmware/Software | Configuration | Bugs | Boot Errors | Resets | Help

</includeonly

Contents

[edit] WARNING!!

The reset information below should only be done at your own risk!! In some cases, it could disable your DVR or cable features, requiring a service call or replacement. It's even possible you could be fined if the DVR is damaged.

[edit] DVR HDD Reset

WARNING: this will wipe out all of your recordings, all scheduled recordings, all series recordings (your series priority list), and all manual recordings!! Write down everything you can before you do this!

  1. The DVR should be turned on. Press CABLE, POWER to turn off the box.
  2. Immediately press OK/SELECT to bring up the diagnostics page.
  3. While on this screen, press the following key sequences press the counter-clockwise arrow (REPLAY on some remotes) 2 times, then press the MyDVR (LIST on some remotes), button 3 times then the live button 2 times."Clr" will appear on the LED display.
  4. Press OK/SELECT to proceed with the reset. The STB should now reformat the HD & then perform a STB reset and begin to reload your Cable settings and Time Settings from the Head End. It will then begin to populate the Guide data over the next 2 - 24 hours.

On some systems, the button press pattern may be 1-3-1, not 2-3-2 as above. This is true for at least the DCT 3416 I on Shaw.

[edit] DVR Authorization and Factory Full Reset

WARNING: This will download and reinstall the DVR firmware and software. This SHOULD not erase your user settings or delete your stored recordings on the DVR. This is not guaranteed; proceed at your own risk.

  1. Unplug the power cord from the DVR.
  2. On the front of the DVR, press & hold the POWER & MENU buttons while plugging the power cord back into the DVR. The display should now read "boot".
  3. Release the POWER & MENU buttons.
  4. Press the UP or DOWN ARROW buttons on the DVR (not the remote) until you see "n dl" on the display.
  5. Press the OK/SELECT on the DVR to begin authorization & downloading of software, STB/DVR firmware from your cable headend. It could take up to 20 minutes to download the firmware, the software could take up to 2 hours depending on what software your cable provider has. You should see "n dl" in the LED display with a line moving in a square.
  6. After it completes this download the DVR will then reboot and begin to download the time settings for the clock along with your cable account info and settings. After this is done, it will begin to populate the Guide info. It could take up to 24 hours to fill in all 2 weeks of Guide info. Depending on your location, environmental variables and amount of users with digital cable or cable Internet, the download can take up to twice as long.
  7. If the display on your Motorola DVR displays only the number 0 after performing this process, it is in need of a reset by your cable provider. Call them and ask them to reset your box.
  • This procedure is not confirmed to work on the newer DCH-series DVRs. It does not work on Time Warner Cable's version 6416 DVR (except in San Diego) nor does it appear to work on ANY DCH3416 boxes. It is, however, confirmed to be working on Insight Communications model 6416 III and Cox Communications model DCT3416 I.

[edit] Remote Control Resets

Information on resetting the remote control can be found at Programming the Remote\Resets

Retrieved from "http://en.wikibooks.org/wiki/How_to_use_a_Motorola_DVR/Resets"