Summary

Typical signal from a scan with the AFM in lateral force mode. At the turning points the tip sticks to the surface and the signal has a linear slope with the detector sensitivity. When the lateral tip-sample force exceeds the static friction force between the sample and substrate, the tip will start to slide with the dynamic friction force and s steady signal.

• This illustration was made for the Opensource Handbook of Nanoscience and Nanotechnology

• Please acknowledge the Opensource Handbook of Nanoscience and Nanotechnology if you use this illustration!

• The image also appears on the Commons/nanotechnology page

• Illustration by Kristian Molhave and released for free use provided you acknowledge using it from the Opensource Handbook of Nanoscience and Nanotechnology.

Licensing

This file is licensed under the Creative Commons Attribution 2.5 Generic license.

You are free:

• to share – to copy, distribute and transmit the work
• to remix – to adapt the work

Under the following conditions:

• attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

https://creativecommons.org/licenses/by/2.5CC BY 2.5 Creative Commons Attribution 2.5 truetrue